The Warmup Dual Overlay is a free-floating system designed for use over the Warmup underfloor heating foil heaters. Its purpose is to give a smooth and seamless subfloor, suitable for soft and resilient floor finishes, such as vinyl and carpet.
What is the purpose of the Dual Overlay System? Read More »
The baseboard and top board are both provided with a contact adhesive which bonds them together. No additional glue or adhesive should be used.
Do I need glue or adhesive to stick the base board and the top board together? Read More »
The top boards stick directly to the base boards. However, it needs to be ensured that each layer is laid out with staggered joints and arranged so that the top boards overlap the joints in the base board. This ensures a stable floating floor on top of the underfloor heating foil heaters.
The way the insulation boards are fixed to the subfloor depends on the base type. On a concrete base, the insulation boards are put down with a suitable flexible tile adhesive. The boards should be laid with staggered joints and once the flexible tile adhesive hardens, the joints should be re-enforced with glass fibre tape.
Why should I use insulation boards on a concrete base? Read More »
Ensuring the total load does not exceed the maximum rating of the thermostat, two heaters can be connected before requiring a junction box.
While underfloor heating installation can be completed by a competent DIY, thermostats require electrical work which must be completed by an electrician. All wiring and electrical work must be completed by a qualified and certified electrician only.
Can I install a thermostat myself? Read More »
Thermostats can be used to control underfloor heating totalling more than 16 amps if a contactor and RC unit are used in the circuit. Please seek advice from a qualified and certified electrician or our technical team on this type of installation.
The heaters total more than 16 amps, is it still possible to use one thermostat? Read More »
Our programmable 3iE energy-monitor thermostat has an amperage limit of 16 amps. You can connect as many mats or panels needed as long as the amperage doesn’t exceed this limit.
How many Warmup mats or panels can I connect to one thermostat? Read More »
Absolutely! Our electric underfloor heating systems would be the best choice. Our systems have been designed with a revolutionary, very thin heating element (only 1.8mm) to allow you to install the system without raising the floor height.
Can I install underfloor heating without raising the floor? Read More »
Underfloor heating systems are very efficient because they distribute the heat uniformly and gently, at a low temperature, from the whole floor surface, concentrating the heat in the lower half of the room. There is neither heat loss, nor wastage of energy and you can heat the rooms you want, exactly when you want.
How efficient is underfloor (radiant) heating? Read More »
Warmup offers an extensive range of electric and water floor systems compatible with all floor types, rooms and projects.
![Thumbnail [200x250]](/wp-content/uploads/Electric-Category-Page-Image.jpg)
![Thumbnail [200x250]](/wp-content/uploads/Hydronic-Category-Page-Image-1.jpg)
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
